FREE SHIPPING ON ALL US OREDERS



DIGIGEAR PCD-TP-202CS PCI Dual Rear Slot PCI1520-PDV CardBus PC/PCMCIA Card Reader

Digigear Inc

Regular price $89.00

PCD-TP-202SC/SC: PCI Dual Slot Rear Load CardBus PC card Reader

Brief Description:
PCI to 2 ports PC Card / Cardbus Adapter. TI chip and Sanyo OS-CON design in. No Driver needed. CE / FCC / RoHS. 2009 new produc

Detailed Description:
PCI to 2-slot PCMCIA PC Card Adapter supports 3.3V and 5V PC cards (PCMCIA/Cardbus). It allows PC/ Cardbus cards Hot- Swap without power off the system. 2 independent icons in MY COMPUTER. The adapter is an easy and quick installing to extend more PC cards devices for any desktop PC.

PC cards (PCMCIA/ Cardbus)supporting: 

wireless, 3G/3.5G, PC Flash Cards, Memory adapter PC card, Panasonic P2 cards...etc


Feature:
* PCI interfaces compatible with 3.3V and 5V PCI signaling environment.
* Mix-and-match 5V/3.3V 16bits PC cards.
* 2 PC Card Slot with hot insertion and removal.
* 2 I/O windows and two memory windows available to each PCMCIA socket.
* JAPAN SANYO OS-CON Solid Capacitor design in. 
* Microsoft Windows 7, 2000, XP, Vista and future versions compliant.
* Mac OS 10.4.10 compliant.
* Fully CE/FCC/RoHS compliant.
* No Driver Needed.



You best choice for using 2 ports PC/Cardbus cards in Desktop PC.

Re Trouble shooting
If your computer has Elan PCI card reader before, please remove Elan driver and make sure that your computer has the following file
"C:\\WINDOWS\system32\DRIVERS\pcmcia.sys",
Our readers use Windows Native driver,

Note:
PCMCIA card Drivers Information
Drivers are automatically installed by the Windows when it recognizes a PC Card slot at installation, but often not installed if it doesn't. Typically these drivers are not present on a desktop system since most customers add a PCI to PC Card drive reader well after Windows software is installed on a system. 

If you have a retail CD-ROM of the Windows XP/Vista/7/8/10 installation disk, then this isn't an issue since simply inserting the CD-ROM during the new hardware found routine will allow Windows to find and install the correct drivers. However, many end users purchase computers from large vendors with Windows XP/Vista pre-installed and the CD-ROM they get with their system isn't a full copy of Windows (a restore disk) although they paid in full for Windows. In this case the end users needs to contact their system vendor and tell them that they need the "signed Microsoft Windows XP/Vista/7/8/10 drivers for the R5C485, R5C486, R5C843, or PCI1510" depending on which controller their PC Card drive reader uses. The drivers may already be on a system in "C:\\WINDOWS\system32\DRIVERS\pcmcia.sys", and instructing the installation routine to that file may help.