|
ShopDigi.com/DigiGear Inc.
DigiGear Inc./ShopDigi.com deals directly with OEM (original equipment manufacturers) to bring end users name brand quality products at a fraction of the cost. Combining our low prices with friendly and courteous customer service, ShopDigi.com strives to make YOUR online shopping experience as pleasant as possible. For retail orders, please click here
For wholesaler/reseller/OEM inquiries, please call 626-813-0236 or e-mail info@shopdigi.com. Please fax us your reseller's permit to 413-778-3604 before we quote you the wholesaler pricing and for more information!
DigiGear introduces DIY 3D Lenticular Photo Kit: EZ3D Photo Print
3D Lenticular Photo DIY Kit; Frame, Lenses, and Software included. Contains everything you need to convert your favorite images into 3D in just 3 easy steps! No Special 3D glasses required! Good for personal and photo shop; Print at home or now you can print at retail and on-line photo labs.
|
|
DigiGear introduces Low-Profile PCI to font-load PC Cardbus Adapter, PCD-TP110C.
PCD-TP110CS is a high-performance PCI-to-PC Card Drive Unit that supports one independent card socket compliant with the 16/32-bit PC Card standard defined in 1997 PC Card Standard. Provides a rich feature set that makes it the best choice for bridging between PCI and PC Card in desktop computers. Compliant with the 16-bit PC Card specification defines in PCMCIA Release 2.1 and JEIDA 4.2 and can support any combination of 16-bit or 32-bit PC Card in the one socket, powered at 5V or 3.3V as required. The host system interface of PCD-TP110CS is compliant with the PCI Local Bus specification 2.2. PCD-TP110CS is register set compatible with Intel 82365SL controller and compatible with ExCA, it enables the PCD-TP110CS to support almost all of the PC Card applications including: SRAM card, Linear Flash card, ATA Flash card, Modem card and Wireless LAN card.
* PCD-TP110CS provides one front-access PCMCIA / CardBus socket solution for PC.
* PCI Local Bus Specification Revision 2.2 compliant.
* PCMCIA 2.1, JEIDA 4.2 compliant. 3.3V, 5.0V, or mixed 3.3V/5.0V operation.
* Intel 82365SL register compatible, ExCA compatible.
* The 3.5" front Drive Unit with built-in one socket is connected to the PCI Interface Board by using the flat ribbon cable.
* There are one PC card socket that can be used for Type I / Type II / Type III PC Card in this unit.
* Support IRQ steering (PCMCIA -16Bit), native driver built in Windows XP.
* Support IRQ steering (PCMCIA -16Bit), optional driver provided in Windows Me or Windows 2000
Socket:
Supports PC Cards (Type I/II/II)
PCMCIA: 8/16 Bit, 8 MHz, 3.3/5V.
CardBus: 32 Bit, 33 MHz, 3.3 V.
|
|
DigiGear introduces PCIe to Expresscard Adapters, PCIe-101/PCE01, PCE10, and PCU10.
The Latest PCI Express supports 2.5Gb/s data rate for a fastest data transfer. This PCIe-101 accepts both 34mm and 54 mm express card and allows express card’s Hot- Plug and hot swap without power off the system. The PCIe-101 is an easy and quick installing to extend more applications for personal desktop PC using.
The Latest PCI Express supports 5Gb/s data rate for a fastest data transfer. This PCE10 accepts both 34mm and 54 mm ExpressCard. PCE10 is an easy and quick installing to extend more applications for Indutrial PC using.
PCU10 supports USB-based ExpressCard/54 /34 adapters to any USB equipped computer
1 socket for USB 2.0 ExpressCard.
Quickly and easily adds one ExpressCard/54 slot (USB-based) to USB equipped desktop or notebook computers; allowing older systems to use the latest ExpressCard adapter cards
Works with USB-based ExpressCard devices including Wireless Wide Area Network modems (such as CDMA, EV-DO, GPRS, etc.), flash memory, flash card adapters, security, legacy I/O (PS2, serial, parallel), optical disk drives, GPS receivers, and more…
|
|